

Advantages
- Patented Underlayment: US Pat. No. 9,869,100 / Canadian Pat. No. 2,948,276
- Space age foam on BOTH sides makes your floors cozy and comfortable
- Air gap design promotes air flow under your floors to evaporate mold causing moisture
- You can lay Laminates, Engineered Hardwood or Carpet directly on top of DMX Airflow™, NO OSB or Plywood required
- Simple, fast and easy to install – no special tools required
- Low profile means that you do not have to re-adjust the heights of your doors and stairs
- 100% Waterproof on ALL sides
- Complete moisture-proof seals at the joints with DMX Joining Tape™
- Does NOT require a complicated moisture test of the concrete prior to installation as required by traditional foam underlayments
- Foam on both sides of membrane insulate your floors from the cold
- Crush Resistant – Compressive strength of 8,000 lbs/sq.ft to 55 PSI
- 25-Year Warranty – Best in the Industry
Dimensions | Imperial | Metric |
---|---|---|
Roll Length | 29 feet | 8.8 metres |
Roll Width | 42 pouces | 1.07 metres |
Dimple Height | 1/8″ | 4 mm |
Roll Weight | 15 lbs | 6.5 kg |
Sq. Ft. / Roll | 100 sq.ft. | 9.3 sq.m. |
Compressive Strength | 8000 lb/sq.ft | 39059 kg/sq.m. |
DMX Airflow™ Premium Underlayment videos
Just the facts



Testimonials
“I completed approximately 3 months of research on Underlayments as I wanted to ensure that my floor were protected from moisture. I did my research online and came across DMX Airflow. I found the videos helpful and noticed an increase in the warmth of the floors before I even completed my project, when I only…
“This product was very easy to use and the results were excellent. I started with a small room and after the flooring was laid down there was no sound what so ever when you walked on it. It gave a cushioned feeling yet you could tell the strength was there to support anything. I am…
“My wife and I hired a general contractor to finish our unfinshed basement in our newly built home. In order to save money I decided that I would handle the subfloor and floor installation in order to save labour costs and we would leave all the rest (framing, electrical, plumbing, drywall etc) to the pros….
“We installed DMX Airflow over our concrete basement floor before installing laminate over it. It was fun & easy to work with. We’ve found that not only does it keep the floor dry it is also much warmer. We went with this combination mainly because of the ease of cleaning. So far so good, everything…